Jump to the page content
Simplified Chinese
search
Contact information

Xforce force sensor

download
Load range
  • 5 N - 250 kN
Precision grade
  • ISO 7500-1
The special features
  • A force sensor for two kinds of system configuration
Force sensor 5 10 20 50 100 N
The order no. 057091 060253 060256 060257 060258
Order number is used in the ProLine 0639191 0639201 0639211 0639221 0639231
Nominal force Fnom 5 10 20 50 100 N
precision
Precision grade 1 (from Fnom0.4%) 0.022 0.042 0.08 0.2 0.4 N
Precision grade 0.5 (from Fnom2%) 0.1 0.2 0.4 1.0 2.0 N
size
The installation height 55 55 55 55 55 mm
The connection
Connection thread M28x1. 5 M28x1. 5 M28x1. 5 M28x1. 5 M28x1. 5
Ø 8 Ø 8 Ø 8 Ø 8 Ø 8 mm
Impact/limit
The limit bending moment 0.73 1.03 1.33 2.03 3.03 Nm
Limit torque 10.04 10.04 10.04 10.04 10.04 Nm
  1. Only with Proline frame to connect, please comply with the specifications.
  2. For calibration and use Xforce 5 n and 10 n extend measurement range, there must be corresponding environment and operating requirements.Without the installation position of shock and vibration are the most basic conditions.More details can be find operations manual and installation instructions.
  3. When no load force sensor measuring direction maximum bending moment of the Mb.Loaded into the nominal load at the same time, the value must be cut in half.
  4. When unloading.Loaded into the nominal load at the same time, the value should be cut in half.
Force sensor 0.2 0.5 0.5 1 kN
The order no. 011563 011562 057993 011560
Order number is used in the ProLine 0185421 0185401 0584231 0185391
Nominal force Fnom 0.2 0.5 0.5 1 kN
precision
Precision grade 1 (from Fnom0.4%) 0.8 2.0 2.0 4.0 N
Precision grade 0.5 (from Fnom2%) 4.0 10.0 10.0 20.0 N
size
The installation height 55 55 61 61 mm
The connection
Connection thread M28x1. 5 M28x1. 5 M28x1. 5 M28x1. 5
8 Ø 8 Ø 20 Ø 202 mm
Impact/limit
The limit bending moment 2 (3)34 5 (7)34 5 (7)34 15 (17)34 Nm
Limit torque 5 (14)54 7 (35)54 7 (35)54 17 (50)54 Nm
  1. Only with Proline frame to connect, please comply with the specifications.
  2. Using Xforce force sensor means for 1 - kN sensors installed column diameter from 8 mm to 20 mm
  3. When no load force sensor measuring direction maximum bending moment of the Mb.Loaded into the nominal load at the same time, the value must be cut in half.
  4. The torque limit value refers to the connection system.If more than this value, the need to calibration.Parentheses value is relative to the limit of the torque sensor measurement.
  5. When unloading.Loaded into the nominal load at the same time, the value should be cut in half.
Force sensor 2.5 5 10 10 20 kN
The order no. 011558 011556 017955 011554 017907
Order number is used in the ProLine 0185381 0185371 - 0185361 0192421
Nominal force Fnom 2.5 5 10 10 20 kN
precision
Precision grade 1 (from Fnom0.4%) 10 20 40 40 80 N
Precision grade 0.5 (from Fnom2%) 50 100 200 200 400 N
size
The installation height 61 61 54 70 66 mm
The connection
Connection thread M28x1. 5 M28x1. 5 - M28x1. 5 -
Connecting flange - - Flange 12 - Flange 12
Ø 20 Ø 20 Ø 20 Ø 20 Ø 36 mm
Impact/limit
The limit bending moment 30 (34)34 50 (58)34 80 (115).34 80 (115).34 250 (460).34 Nm
Limit torque 17 (80).54 17 (130).54 17 (200).54 17 (200).54 250 (1500).54 Nm
  1. Only with Proline frame to connect, please comply with the specifications.
  2. Flange 1 = 115 mm pitch circle, Flange 2 = 220 mm pitch circle.
  3. When no load force sensor measuring direction maximum bending moment of the Mb.Loaded into the nominal load at the same time, the value must be cut in half.
  4. The torque limit value refers to the connection system.If more than this value, the need to calibration.Parentheses value is relative to the limit of the torque sensor measurement.
  5. When unloading.Loaded into the nominal load at the same time, the value should be cut in half.
Force sensor 30 50 100 150 kN
The order no. 017908 017909 017910 017911
Order number is used in the ProLine 0192461 0192481 0192541 -
Nominal force Fnom 30 50 100 150 kN
precision
Precision grade 1 (from Fnom0.4%) 120 200 400 600 N
Precision grade 0.5 (from Fnom2%) 600 1000 2000 3000 N
size
The installation height 66 66 104 104 mm
The connection
Connecting flange Flange 12 Flange 12 Flange 22 Flange 22
Ø 36 Ø 36 Ø 60 Ø 60 mm
Impact/limit
The limit bending moment 250 (500).34 250 (650).34 3500 (4500).34 4000 (5000).34 Nm
Limit torque 250 (1800).54 250 (3000).54 6500 (10000).54 5800 (12500).54 Nm
  1. Only with Proline frame to connect, please comply with the specifications.
  2. Flange 1 = 115 mm pitch circle, Flange 2 = 220 mm pitch circle.
  3. When no load force sensor measuring direction maximum bending moment of the Mb.Loaded into the nominal load at the same time, the value must be cut in half.
  4. The torque limit value refers to the connection system.If more than this value, the need to calibration.Parentheses value is relative to the limit of the torque sensor measurement.
  5. When unloading.Loaded into the nominal load at the same time, the value should be cut in half.
Force sensor 5 10 20 50 100 N
The order no. 063924 063925 063926 060259 060260
Order number is used in the ProLine 0639271 0639291 0639301 0639321 0639331
Nominal force Fnom 5 10 20 50 100 N
precision
Precision grade 1 (from Fnom0.2%) - 0.022 0.04 0.1 0.2 N
Precision grade 1 (from Fnom0.4%) 0.022 - - - - N
Precision grade 0.5 (from Fnom1%) 0.05 0.1 0.2 0.5 1.0 N
size
The installation height 55 55 55 55 55 mm
The connection
Connection thread M28x1. 5 M28x1. 5 M28x1. 5 M28x1. 5 M28x1. 5
Ø 8 Ø 8 Ø 8 Ø 8 Ø 8 mm
Impact/limit
The limit bending moment 6.03 6.03 6.03 6.03 6.03 Nm
Limit torque 10.04 10.04 10.04 10.04 10.04 Nm
  1. Only with Proline frame to connect, please comply with the specifications.
  2. For calibration and use Xforce 5 n and 10 n extend measurement range, there must be corresponding environment and operating requirements.Without the installation position of shock and vibration are the most basic conditions.More details can be find operations manual and installation instructions.
  3. When no load force sensor measuring direction maximum bending moment of the Mb.Loaded into the nominal load at the same time, the value must be cut in half.
  4. When unloading.Loaded into the nominal load at the same time, the value should be cut in half.
Force sensor 0.2 0.2 0.5 0.5 1 kN
The order no. 011571 052697 011570 057991 011569
Order number is used in the ProLine 0185481 - 0185471 0584241 0185461
Nominal force Fnom 0.2 0.2 0.5 0.5 1 kN
precision
Precision grade 1 (from Fnom0.2%) 0.4 0.4 1.0 1.0 2.0 N
Precision grade 0.5 (from Fnom1%) 2.0 2.0 5.0 5.0 10.0 N
size
The installation height 55.3 66 55.3 61 61 mm
The connection
Connection thread M28x1. 5 M28x1. 5 M28x1. 5 M28x1. 5 M28x1. 5
Ø 8 Ø 20 Ø 8 Ø 20 Ø 202 mm
Impact/limit
The limit bending moment 2 (3)34 2.03 5 (7)34 5 (7)34 15 (17)34 Nm
Limit torque 5 (14)54 5.05 7 (35)54 7 (35)54 17 (50)54 Nm
  1. Only with Proline frame to connect, please comply with the specifications.
  2. Using Xforce force sensor means for 1 - kN sensors installed column diameter from 8 mm to 20 mm
  3. When no load force sensor measuring direction maximum bending moment of the Mb.Loaded into the nominal load at the same time, the value must be cut in half.
  4. The torque limit value refers to the connection system.If more than this value, the need to calibration.Parentheses value is relative to the limit of the torque sensor measurement.
  5. When unloading.Loaded into the nominal load at the same time, the value should be cut in half.
Force sensor 2.5 5 10 10 kN
The order no. 011568 011566 017953 011565
Order number is used in the ProLine 0185451 0185441 0185541 0185431
Nominal force Fnom 2.5 5 10 10 kN
precision
Precision grade 1 (from Fnom0.2%) 5.0 10.0 20.0 20.0 N
Precision grade 0.5 (from Fnom1%) 25.0 50.0 100.0 100.0 N
size
The installation height 61 61 54 70 mm
The connection
Connection thread M28x1. 5 M28x1. 5 - M28x1. 5
Connecting flange - - Flange 12 -
Ø 20 Ø 20 Ø 20 Ø 20 mm
Impact/limit
The limit bending moment 30 (34)34 50 (58)34 80 (115).34 80 (115).34 Nm
Limit torque 17 (80).54 17 (130).5 17 (200).54 17 (200).54 Nm
  1. Only with Proline frame to connect, please comply with the specifications.
  2. Flange 1 = 115 mm pitch circle, Flange 2 = 220 mm pitch circle.
  3. When no load force sensor measuring direction maximum bending moment of the Mb.Loaded into the nominal load at the same time, the value must be cut in half.
  4. The torque limit value refers to the connection system.If more than this value, the need to calibration.Parentheses value is relative to the limit of the torque sensor measurement.
  5. When unloading.Loaded into the nominal load at the same time, the value should be cut in half.
Force sensor 10 10 20 30 50 kN
The order no. 1008815 1008732 318936 325642 318934
Order number is used in the ProLine - 10087331 3252221 3256441 3252231
Nominal force Fnom 10 10 20 30 50 kN
precision
Precision grade 1 (from Fnom0.2%) 20 20 40 60 100 N
Precision grade 0.5 (from Fnom1%) 100 100 200 300 500 N
size
The installation height 74 90 75.5 75.5 75 mm
The connection
Connection thread - M28x1. 5 - - -
Connecting flange Flange 12 - Flange 12 Flange 12 Flange 12
Ø 20 Ø 20 Ø 36 Ø 36 Ø 36 mm
Impact/limit
The limit bending moment 5003 5003 6003 7003 11003 Nm
Limit torque 5004 5004 5004 5004 18004 Nm
  1. Only with Proline frame to connect, please comply with the specifications.
  2. Flange 1 = 115 mm pitch circle, Flange 2 = 220 mm pitch circle.
  3. When no load force sensor measuring direction maximum bending moment of the Mb.Loaded into the nominal load at the same time, the value must be cut in half.
  4. When unloading.Loaded into the nominal load at the same time, the value should be cut in half.
Force sensor 100 100 150 250 250 kN
The order no. 318932 0689221 320304 318930 0689182
Order number is used in the ProLine 3253283 - - -
Nominal force Fnom 100 100 150 250 250 kN
33721 56202 56202
precision
Precision grade 1 (from Fnom0.2%) 200 - 300 500 500 N
Precision grade 0.5 (from Fnom1%) 1000 - 1500 2500 2500 N
Precision grade 1 (from Fnom0.4%) - 400 - - -
Precision grade 0.5 (from Fnom2%) - 2000 - - -
size
The installation height 106 131 106 162 131 mm
The connection
Connecting flange Flange 24 Flange 24 Flange 24 Flange 24 Flange 24
Impact/limit
The limit bending moment 48005 300005 80005 300005 300005 Nm
Limit torque 100006 550007 620000 550006 550006 Nm
  1. Flange interface using 70 mm centering rules replace installed column, used to connect to the tooling (order No. : 068902)) and the hydraulic clamp model 8594 BOW wedge (order No. : No. 072865 and 072869).Design and technical information about order number 068918.
  2. Flange interface using centering rules replace install pillar (115/220 mm pitch, centering gauge D30/70 mm).
  3. Only with Proline frame to connect, please comply with the specifications.
  4. Flange 1 = 115 mm pitch circle, Flange 2 = 220 mm pitch circle.
  5. When no load force sensor measuring direction maximum bending moment of the Mb.Loaded into the nominal load at the same time, the value must be cut in half.
  6. When unloading.Loaded into the nominal load at the same time, the value should be cut in half.
  7. When unloading.Loaded into the nominal load at the same time, the value must be cut in half.

An overview of the Xforce force sensor

Suitable for tensile test, compression test, bending test and the zero load cycle test.

Advantages and characteristics of the

Advantages and characteristics of the

Self identification sensor plug
System calibration
Excellent linear
Large measurement range
Overload protection, limit test force and work force
Simple mechanical pin inserted into the system, including the test space
Daily check device
System configuration generator - force value sensor

Self identification sensor plug

These smart force sensor has a unique installation block in an internal EEPROM in the electronic identification system.

  • TestXpert II test software can automatically identify the sensor model and performance.
  • Automatic loading force and stroke limit.
  • Sensor information overload and date stored block in the EEPROM.

System calibration

Before delivery, each force sensor with the testing machine (and drive) and electronic measurement controller as a complete system to do the calibration.This records in the corresponding factory calibration certificate.

Excellent linear

  • Xforce HP and Xforce K force sensor has a high accuracy.
  • Cooperate with testControl II electronic controller, Xforce HP and Xforce K (since 200 n) force sensor can provide better than the requirements of the ISO 7500 linear (= relative error).
  • Since 0.1% of the rated test force of the force sensor, highest display error less than 1% of the measured values;Since 0.4% of the rated test force, highest the 0.25% that display error of measured value.

Large measurement range

  • Large measuring range to avoid the second force sensor, can maximize the purchase cost and annual calibration cost saving.
  • Even if is to use heavy test tooling or sample clamp and produce high preloading, finally still can obtain the force sensor measurement range.Force sensor can still in full load, tooling weight amounted to 45% of rated test force at the same time.

Overload protection, limit test force and work force

  • Xforce force sensor is very strong and durable, can be 300% of the rated maximum tolerance sensor test force of the load, and is not going to happen, mechanical damage tolerance sensor test force 150% of rated load is not going to happen when zero drift.So don't usually need to overload protection, such as preloading spring, mechanical stop or guide to absorb the lateral force.
  • Beam can range by software and hardware limit stops, in order to protect the force sensor and the test fixture.
  • Can be set in the testXpert III strength limit automatically closed test system, protect the force sensor.
Testcontrol - tc - ii - hydraulic - sample clamp - type - 8803 - safety devices - open xsl-fo

Simple mechanical pin inserted into the system, including the test space

  • Each value of the force sensor with its precise matching the installation of the pillar, quick, convenient assembly fixture and the test sample assembly jig, and the best for implementation and test axis.
  • Operator only set an initial position (e.g., testing jig separation), and stored in testXpert III test software test environment.Each time the tooling changed back to the initial position can be automatically and accurately.There is no more convenient than these!
  • Xforce K value sensors can be optional installation of column 2, and so can be applied to the double test area of test environment.

Daily check device

Daily check device used for up to 500 N force value sensor detection.The device to detect ion sensors in compression and tensile direction of system error.

Learn more daily inspection device information

Force sensor to download

The name type size download
  • Product information: HP Xforce force sensorPDF383 KB
  • Product information: Xforce K force sensorPDF3 MB
  • Product information: Xforce HP + and Xforce K + force sensorPDF3 MB
  • Product information: equipped with load distribution unit Xforce load measurement systemPDF389 KB
  • Product information: Xforce dynamic force sensorPDF314 KB
  • Daily checkPDF750 KB
Top
Baidu