Kappa LA spring

In a axial

• Carried out in accordance with the ASTM E1012 on
• No wear the lever fulcrum help a axial, conform to ISO 204, ASTM E139, ASTM E292 and NADCAP standard requirements
• Spherical fixture to ensure the automatic adjustment of the in the tensile test, at the same time, the bending stress is low, and conform to the standard (+ / - 10%)

Accurate sample temperature

• ZwickRoell high temperature furnace specially designed for creep test and optimize it.
• High temperature controller can be integrated in the machine base, save a space.
• One, two, or three sample thermocouple - depends on the sample length
• Thermocouple and furnace with the center of the sample automatic entrainment - took place in larger elongation and test duration longer cases
• Does not depend on the temperature control of the operator function, can automatically adjust the control parameters to adapt to the influence factors, such as
  - heating rate and the target temperature
  - sample size, material and shape
  - the number of thermocouples
• Make sure the temperature along the sample uniform distribution
• Reach the target temperature,There is noThe sample temperature overshoot
• No longerNeed to determine the temperature of the control parameters according to the experience.
• Temperature range is wide, tolerance is higher than the ISO 204 and ASTM standard E139:
  200 ° C...400 ° C: plus or minus 2 k
  400 ° C...K to 1150 ° C: + 1

Intelligent electronic control system and software

• The working process in the same direction, thus the training needs to a minimum
• When the applied load strain and force control (stepless/block)
• Can choose the digital closed-loop control creep test load, stress and strain and the stress relaxation test, as well as user defined loading cycle
• In the test performance evaluation process is easy to operation and test result
• Integrated temperature control, namely high temperature controller
• Before the test phase (heating) to control the temperature, recording and exegesis
• Data security concept design is perfect

The best stretch

To obtain reliable strain measurement, should with extensometer test application to achieve the best matching effect.Therefore, choosing the appropriate extension project is essential, it is also the basis of test results can be repeated.ZwickRoell工程师可帮助用户选择合适的引伸计，无需靠猜测来决定是使用光学引伸计还是接触式引伸计：

• Non-contact stretchvideoXtens
• Lateral connection contact amplify meter:
  - makroXtens with high temperature sensor
  - side stretch into the type
• The axial connection contact amplify meter:
  - the telescopic extension project
  - 4 stem extension
• DCPD amplify meter for measuring crack growth

For further details, please clickhere.

A variety of test accessories

There are many kinds of machinery accessories to choose from, so widely used, allowing the environment temperature, under high temperature and ultra high temperature using the same testing machine for test.

• With different size and slot of the melting pot
• Sample clamp and loading chain
• Contact type and non-contact pilot project
• Security fence

For future changes in technology is ready

Modular design means that the test system could be transformed as needed or upgraded.In addition, the testControl II electronic measurement control system will be compatible with the new version ZwickRoell software.